1/8 Scale Nitro 4WD Buggy MBX8 

>> MBX8 Picture <<

Mugen Seiki is proud to introduce the release of the MBX8 1/8 Nitro Buggy! 
The NEW MBX
8 has a lot to offer! More durable, more acceleration, more runtime, easier to work on, and lightweight. The new Mugen Seiki MBX8 buggy has been put to the tested and develop by the best drivers in the world.
Click the picture for larger photo! Click the picture for larger photo! Click the picture for larger photo! Click the picture for larger photo!
Click the picture for larger photo! Click the picture for larger photo! Click the picture for larger photo! Click the picture for larger photo!
E2021 - MBX8 1/8 Nitro Buggy Kit (off road):
- Chassis:
The MBX8 chassis features a new design that improves traction and stability in bumpy conditions and on the exit of corners. The steering post are also keyed into the MBX8 chassis for easier maintenance.
- Differential & drive train:
High Traction Differentials are included in the MBX8. The Mugen Seiki HTD provides increased acceleration, longer runtime, and more consistent handling. The HTD's also increase stability, traction, and improve handling in bumpy conditions. The HTD has a new larger volume diff cup to increase consistency during long main events. This makes it easier to time rhythm sections, better in bumpy and low grip conditions, helps to increase traction, and increases fuel mileage.
The new gearbox makes allows you to remove and service the differentials without detaching the suspension arm mounts. Easy access to the front and rear differential. 
  New straight cut 13T bevel gear & 44T conical gear
The new straight cut bevel and conical gears increase acceleration, runtime, and efficiency. A free and efficient drive train will also increase speeds while cornering.
- Light weight one-piece wing mount:
The new lightweight one-piece wing mount lower the center of gravity. The position of the wing and wing mount is optimized to improve the performance of vehicle. The height of the wing mount is adjustable. This allows you to control the down force on the rear of the vehicle by simply raising or lowering the mount on the shock tower.
- Light weight high down-force wing:
The new IFMAR legal wing is lightweight and provides amazing down force and cornering. The underside of the wing uses a new design to reduced weight and creates additional down-force.
- Suspension:
New suspension mounts. The FF/FR/RF/RR are new for the MBX8.
The front and rear lower arms use a new impact resistant material for increased durability. The new arms are box-shaped and include arm stiffeners to reduce flex and increase durability. Adjusting the hardness of the lower suspension arms is now possible. This allows you to fine tune the steering and traction from track to track. CFRP plates will be released as an option part.
- Center differential mount & plate:
The center differential mounts use a stiffer material and has a new top plate to reduce chassis flex and increases clutch bell, spur gear, and clutch bearing life. The reduced chassis flex also provides more consistent handling in all conditions. The top plate design also makes it easier to adjust the brakes and easier maintenance.
- Enclosed Battery box and updated carbon fiber radio plate:
The MBX8 still uses a flat 2S Lipo or Life battery, but the receiver battery is now enclosed in a molded battery box. The battery box allows for quick and easy access to the battery. The molded box also helps protect the battery from hard impacts. The battery box is mounted to an updated carbon fiber radio plate.
- Other new parts and upgrades:
Body, Clamping Servo Saver Nut, F/R Shock Towers, Front bumper, Front center and rear center universal joint.
Technical Data:
Width: 309mm
Wheel Base: 315~320mm adjustable
Gear Ratio: 12.24:1
Differentials Oils:
Front - #5,000 (B0322)
Center - #5,000 (B0322)
Rear - #2,000 (B0334)
Shocks, Springs, and Sway Bars:
Front:
#550oil (B0333) | ƒÓ1.6 L70/9.25T shock springs (E2516) | ƒÓ1.3 8H pistons (E2525) | ƒÓ2.3mm ARB (E0164)
Rear:
#550oil (B0333) | ƒÓ1.6 L86/10.75T shock springs (E0563) | ƒÓ1.3 8H pistons (E2525) | ƒÓ2.7mm ARB (E0168)
Download:

Parts List 6.60MB
Other optional parts 1.62MB
Setup Sheet
246MB 
Instruction Manual
13.3MB 
Kit bag details 1.01MB 
Option parts

Other necessary equipment:
2ch Propo and 2 servo/Receiver Battery/21 Class Rear Exhaust Engine (only chassis kit)/Muffler/Manifold/Manifold Spring/Tire w/Wheel&Inner Foam/Engine Starter/Body paint tools/Fuel
*The contents are subject to change without notice due to product improvements and specification changes.
*Final production version of product may and will differ from appearance of product shown on this web page.

Copyright © 2018 Mugen Seiki Co., Ltd. All rights reserved.